|
|
The Rosco Chiller Module, used with Rosco Stage and Studio Fluid, allows you
to produce low-lying fog with variable densities on demand.
The matte black Chiller Module is crafted in a textured, high-impact polymer. It is equipped with a metal basket
for dry ice, a 25' (7.5 m.) power cord, a 24V in-line fan, and speed control.
The operation of the system is simple. Attach the 5 ft. (1.5 m) ducting hose that is included with the Chiller
Module to a Hose Adaptor (sold separately) affixed to the front of a Rosco fog
machine. Attach the other end of the hose to the inlet port of the Chiller Module. As the fog output of the
machine enters the Chiller Module, it is cooled by the dry ice in the basket.
The density of the emerging fog can be controlled with a fan via a knob on the remote control unit. The fan has
a capacity of between 0 and 95 cubic feet per minute, so a wide variety of effects are possible. Using
Ducting Hose, you can transport the output of the chiller Module to the location
you want. Rosco's Ducting Hose will slip over the outlet port of the Module.
When dry ice is not available, ordinary ice may be used. The Chiller Module will not leak as the ice melts, but
water should be emptied or siphoned off frequently, and should not be allowed to accumulate to a height of more
than 6"(60cm).
Dimensions:
32 in. x 18 1/8 in. x 13 3/8 in. (81 cm x 38 cm x 34 cm)
Weight:
35 lb. (15.75 kg)
|
