Products Tech Info Where to Buy Contact Us  
   
   


Supersaturated Roscopaint . View Color Chips

Is a unique acrylic paint, packaged in concentrated form. It is designed to be diluted with water, at least 1:1 and as much as 15:1. With such tremendous extendibility, Supersaturated offers the widest range of effects possible while being extremely economical to use. On porous and non-porous surfaces, Supersaturated achieves vibrant, opaque color fields. It also creates bright, translucent washes where the color remains as intense as aniline dyes, without the health hazards associated with dyes. Supersaturated Roscopaint is formulated with a unique binder that gives it superior adhesion, durability, and flexibility even on difficult surfaces like Rosco Projection Screens and Rosco Dance Floors. It can also be used as a tint for other paints, binders and coatings. Perfect for both interior and exterior projects.

Available in 29 artists' colors that are easily intermixed or combined with other Rosco paints.

FINISH: Matte

SOLVENT: Water

BINDER TYPE: Acrylic co-polymer

DILUTION: Dilute at least 1:1with water, Rosco Clear Acrylic Glaze or a combination of the two as necessary. Diluting will reduce the color concentration and create "glaze" effects. Diluting with more than 5 parts water may reduce binder strength. Add in Rosco Clear Acrylic Glaze to restore adhesion and flexibility.

SURFACE PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime porous surfaces, except fabrics, using Rosco Tough Prime. If painting a new plaster surface, prime wall with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough prime as a final preparation.

APPLICATION: Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in thin  uniform coats, using a good quality brush or roller. Use overlapping strokes, keeping a wet edge. Change roller direction often to avoid patterns and streaking.

FILM THICKNESS: 1:1 Dilution = 1.5 mil. Dry Film

COVERAGE: 3:1 Dilution = Approx. 300 sq. ft. per gallon.

AVG. DRY TIME: AT 75°F (24°C) Dries to the touch in 30 minutes. Can be re-coated in 1-2 hours.

CLEAN-UP: Soap and water.

SHELF LIFE: Minimum 24 months.

PACKAGING: 1 Quart Cans. *Gallon and 5 gallons available.

Specifications  
#06001 Neutral Base* #05984 Moly Orange
#06002 White* #05983 Raw Sienna
#06003 Velour Black* #05985 Burnt Umber
#05965 Red                         #05986 Raw Umber
#05968 Green Shade Blue       #05987 Burnt Sienna
#05969 Ultramarine Blue        #05988 Lemon Yellow
#05971 Chrome Green            #05989 Turquoise Blue
#05972 Emerald Green           #05990 Prussian Blue
#05973 Pthalo Green             #05991 Navy Blue
#05975 Magenta                  #05993 Leather Lake
#05977 Spectrum Red          #05994 Grass Green
#05979 Purple                    #05996 Cerulean Blue
#05980 Iron Red                 #05997 Hunter Green
#05981 Chrome Yellow #05998 Van Dyke Brown
#05982 Yellow Ochre              #05900 Supersaturated Paint Kit

CAUTIONS: Do not apply when surface or air temperatures are below 50°F. Keep from freezing. Avoid prolonged contact with skin or breathing of spray. Do not take internally. Use adequate ventilation. KEEP OUT OF REACH OF CHILDREN.


All technical data, recommendations and service are accurate to the best of our knowledge. Rosco assumes no responsibility for the results obtained or damage incurred from use by the buyer in whole or in part since method of application and its use is beyond our control.

If you have a question about Rosco Scenic Paint, please email scenepaint@rosco.com

 

Products | Tech Info | Where To Buy | Contact Us | Search


© Rosco Laboratories 1998-2008