|
 Rosco's
20 years of fog experience has resulted in the Model 1600 fog machine, the
choice of professionals worldwide. The Model 1600 offers high output and
remarkable flexibility in a compact and easily transportable unit. It has
volume control to give just the right amount of fog for just about any
situation from small wisps to large clouds. The Model 1600 is controlled
through a control panel that serves as either the remote or on-board control
and is connected to the machine with a standard 7 pin XLR connector.
The system uses a
peristaltic pump that has a unique aluminum pump housing designed
specifically for this machine. This pump, in conjunction with a steel heat
exchanger, makes the equipment extremely rugged and enables it to generate
higher outputs than other fog machines.
There are a wide array
of accessories available for the Model 1600 that enhance its flexibility
from the timed Super Remote to a DMX
Interface. In addition, by using the
new Rosco Coldflow or the Chiller Module with
Rosco Stage & Studio Fluid, low-lying fog can be achieved. This is a more economical way of
attaining this popular effect without the messiness of dropping dry ice in
hot water.
The Model 1600 also
offers an air input that allows effects to be created and the machine to
be cleaned easily and quickly. (Clogged heat exchangers are the most
common form of machine malfunction. Using compressed air helps keep the
heat exchanger clean.)
A liter bottle of Rosco
Fog Fluid sits neatly encased in a well at the rear of the machine. Fluid
is fed to the machine via the fluid inlet that is mounted next to the well
on the top of the machine.
Power
requirements: 120 volts, 50/60 Hz, 11.75 Amps. 220/240 volts, 50/60 Hz,
7.5 Amps. 100 volts, 50/60 Hz, 13.5 Amps. Model 1600 is compatible with power sources using 115 volt, 400 Hz.
Dimensions:
18.75" x 8.25" x 7.25" (48cm x 21cm x 18.5cm).
Weight:
21 lbs. (9.45 kg).
Warm-up
time: Approximately five minutes.
Maximum
fluid consumption: 2.5 liters per hour. 63cc per minute.
Particle size: 0.25 - 60 microns.
Standard
remote: 24 volts DC system. Fog switch, fog light and ready light. Cord -
15 feet (4.57m).
Power cord: 7.5 feet (2.25m) EAC Type female plug.
The Model 1600 is UL
and CUL listed, is CE compliant and carries a limited 1 year warranty.
*The optional Super Remote has
all the functions of the Standard Remote plus a programmable output control.
Programmable sequencer will create fog at preset intervals and control the duration of the bursts. |
