|
FINISH:
Matte.
SOLVENT:
Water.
BINDER
TYPE: Vinyl Acrylic.
DILUTION:
Fluorescent Paints should be used straight out of the can. They can be diluted with
water if necessary, however this will reduce the hiding power of the paint.
SURFACE
PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime
porous surfaces, except fabrics, using Rosco Tough
Prime. If painting a new plaster surface, prime wall
with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a
final preparation. Use a white base coat to achieve the most dramatic color effects.
APPLICATION:
Stir contents before use. Do not shake. Apply by brush, roller, or spray gun. Apply in
thin uniform coats, using a good quality brush or roller. Use overlapping strokes,
keeping a wet edge.
FILM
THICKNESS: 2 mil. dry film.
COVERAGE:
Approximately 300 sq. ft. per gallon.
AVG. DRY
TIME: At 75°F
(24°C). Dries to the touch in 30 minutes. Can be re-coated
in 1-2 hours.
CLEAN-UP:
Soap and water.
SHELF
LIFE: Minimum 24 months.
PACKAGING:
Gallon, Quart and Pint Cans.
* Fluorescent pigments
will degrade from prolonged exposure to ultraviolet light. Avoid direct sunlight where possible.
** Invisible Blue is a
milky white paint that fluoresces to a pale blue under blacklight. When
painted over light colored surfaces, Invisible Blue is difficult to detect.
However, it can be seen when painted over dark or black colors.
| Specifications |
| #05779 |
White |
#05784 |
Blue |
| #05780 |
Red |
#05785 |
Invisible Blue** |
| #05781 |
Orange |
#05786 |
Pink |
| #05782 |
Yellow |
#05787 |
Gold |
| #05783 |
Green |
|
|
|