Rosco's LED Channel Mount Kit allows designers to color and/or diffuse the light emitted from LED tape or ribbon and package it in an elegant and practical housing.
The Kit consists of a 72" long extruded aluminum housing, a clear plastic cover, three mounting clips and end caps - one of which is closed and the other contains a wire pass-through. Screws for the end caps are also included.
Assembling the LED tape or ribbon into the channel mount is fast and easy:
Insert the LED ribbon or tape into the Rosco LED Channel Mount.
Install the Mounting Clips into place. Snap the assembly into the Mounting Clips.
Add Rosco color and/or diffusion as needed, and slide the cover into the top groove of the extrusion.
Rosco's LED Channel Mount is field cuttable, so it can be customized on site.
LED Channel Mount Kit
Item
Quantity
72" Extruded Aluminum Housing
1
72" Clear Cover
1
End-Cap closed
1
End-Cap with wire pass-through
1
Screws for end caps
4
Mounting Clips
3
Accepts most off the shelf LED Tape & Ribbon products up to 1/2" wide, including HO LEDs.
Indoor installations only
Assembled Dimensions:
Height O.D.: 1" (25.4mm)
Width O.D.: 1" (25.4mm)
LED Channel Width: 0.67" (17mm)
Length: 72" (1,828mm)
Weight: 1.35lbs
Shipping Weight & Dimensions: 2lbs, 1 5/8" x 76" Tube
Standard LED Channel Mount Color Filters:
Four Rosco Color Filters are readily available for individual purchase as 1 7/16" x 6' strips for insertion into the clear cover of the LED Channel Mount:
Roscolux #111 - Tough Rolux Diffusion
Roscolux #3407 - Full CTO
Roscolux #3408 - 1/2 CTO
Roscolux #3409 - 1/4 CTO
All other Rosco Color Filters are available in lots of 20 - 1 7/16" x 6' strips.
Adjustable Mounting Bracket Accessory:
Allows greater flexibility installing the LED Channel Mount into tight spaces and corners.
