INSTRUCTION MANUAL

A. Before You Begin
B. Assembling the ImagePro™
1. Mounting the Z-Glass Filter
2. Attach the iPro Slide
C. Installation into the Luminaire
D. Powering the ImagePro™
E. Obtaining iPro Slides
F. Make Your Own iPro Slide

BEFORE YOU BEGIN

The ImagePro™ has been designed and tested for use in the Altman Shakespeare, ETC Source Four¹, Selecon Pacific² and Strand SL³. It may be possible to use the ImagePro in other light fixtures as well. For best results the light fixture should meet the following specifications: an Iris Slot for installing accessories; a lamp of 600 watts or less; a dichroic coated reflector designed to pass IR and UV energy; and modern engineering designed to create a cooler light path. It is strongly recommended that you test the luminaire and the ImagePro together before you use them in a live production.

Under normal circumstances, you can expect between 15 and 50 hours of life from your iPro Slide. Many variables will affect your results including the content of the artwork (solid blacks will degrade more quickly) and the bench focus of the luminaire. Failure of the iPro Slide is evidenced by fading of colors and image details, not by burning or melting of the slide or plastic films.

⁽¹⁾Use in Source Four 575 watt version only. Do NOT use in a Source Four 750 watt fixture. Damage to the reflector may result.

⁽²⁾Use in the Selecon Pacific lamped to 575watts only. If used in the 1000 watt version, the iPro Slide will last only 8-10 hours before fading

⁽³⁾For best results in the Strand SL, use the "Broadway" series GLC lamp which burns cooler than previous GLC lamps.