|
|
Rosco Flicker Candles have long been the safe realistic alternative to on-stage flame. Rosco
Flicker Candles are the most realistic non-flame candles you and your audience have ever seen.
They look and act just like real candles. They are virtually indistinguishable from real candles,
right down to the dripping wax on shaft of the unit. Most importantly, they are powered electrically,
so they don't present the potential hazards of using live flames. A simple 9 volt AC adaptor allows
you to raise or lower the dimming level on the Flicker Candle.
To create the random flickering effect of a real flame candle, the realistic tip on the Candles
have two LED's inside of them that turn on and off.
There are many sizes and styles of Flicker Candles available from Rosco.
STANDARD RANGE CANDLES
Self Contained
The Self Contained Candle comes complete with a candle tip, a realistic stem with dripping wax look, an on-off
switch, and connection for a 9 Volt battery. This complete style is ideal for productions where the performers
need to carry a candle from place to place or when the candle needs to be turned on and off during a performance.
|
Product Specifications
|
|
#85489030009
|
Self Contained Candle
|
|
Wired Stem
The Wired Stem Candle comes with a candle tip, a realistic stem with dripping wax look, and 4 foot wire leads
for remote installation to a power source. This style is ideal for building into scenery or props.
|
Products Specifications
|
|
#854089020009
|
Wired Stem Candle
|
|
Basic Module
The Basic Module is the bare bones of the flicker effect. It comes with a candle tip, a 4 inch body,
and short leads for soldering directly to. The Basic Module is best suited for having to build into
a setting of your own and do not need the on-off switch, stem, or extra wires.
|
Product Specifications
|
|
#854089010004
|
Basic Module
|
|
Professional Flicker Candle
|
This is the largest candle in our standard range. At 17.5 inches tall and 1.5 inches in diameter, this
candle is an extra-large version of our Wired Stem Candle. It comes with candle tip, realistic stem with
dripping wax look and 4 foot leads for remote installation to a power source. This candle is ideal for
large chandeliers, and anywhere an oversized candle is needed.
|
Product Specifications
|
|
#894090010017
|
Professional Flicker Candle
|
|
CUSTOM CANDLES
Rosco also carries a wide range of Custom Candles. These candles are available and pre-built into many popular
settings. No wiring and nothing to put together. There are 5 styles in the Custom Range.
Classic Single Candlestick Setting
|
This style comes with a sturdy metal candlestick setting, candle tip, realistic stem with dripping wax look, and 4 foot
wire leads for remote installation to a power source.
|
Product Specifications
|
|
#854090040000
|
Classic Single Candlestick Setting
|
|
Classic Saucer Setting
|
This style comes with a sturdy metal saucer setting, candle tip, realistic
stem with dripping wax look, a 9 volt battery pad, and an on-off switch.
|
Product Specifications
|
|
#854090050000
|
Classic Saucer Setting
|
|
Classic Bottle Setting
|
This style comes with a glass bottle setting, candle tip, realistic stem with dripping wax look, and 4 foot wire
leads for remote installation to a power source.
|
Product Specifications
|
|
#854090060000
|
Classic Bottle Setting
|
|
Classic Hurricane Lantern
|
This style comes built into a sturdy and classic looking setting and has a Basic Module installed inside.
It has a 9 volt battery pad, on off switch and a clip on the underside of the setting for holding the
battery.
|
Product Specifications
|
|
#854090030000
|
Classic Hurricane Lantern
|
|
Classic Three Arm Candelabra Setting
|
This style comes with 3 Wired Stem candles built into a sturdy Three Arm Candelabra setting. It comes with 3 candle
tips, 3 Realistic stems with dripping wax look, on-off switch, and a clip on the underside of the setting for holding
the battery.
|
Product Specifications
|
|
#85409020000
|
Classic Three Arm Candelabra Setting
|
|
TECHNICAL SPECIFICATIONS
Power Requirements:
All Rosco Flicker Candles accept 9 Volt DC power and are not suited for wiring directly to an AC outlet. The Candles can be dimmed by using a 9Volt Battery Eliminator which effectively converts 120V AC to 9V DC. (A common item in stock at your local Radio Shack) Power consumption is 90 mA.
|
CANDLE TECHNICAL INFORMATION (CUSTOM RANGE)
|
|
|
Height
(inches)
|
Diameter
(inches)
|
Connection
|
On/Off Switch
|
Battery Life
(hours)
|
Lamp Life
(hours)
|
|
Classic Single
|
15
|
4.5
|
26" wire leads
|
no
|
16
|
10000
|
|
Classic Bottle
|
15
|
3.5
|
26" wire leads
|
no
|
16
|
10000
|
|
Classic Saucer
|
8
|
4
|
9 volt adaptor
|
yes
|
10
|
10000
|
|
Classic 3 Arm Candelabra
|
14
|
11" wide
|
9 volt adaptor
|
yes
|
5
|
10000
|
|
Classic Hurricane Lantern
|
10.25
|
6
|
9 volt adaptor
|
yes
|
16
|
10000
|
|
CANDLE TECHNICAL INFORMATION (STANDARD RANGE)
|
|
|
Height
(inches)
|
Diameter
(inches)
|
Connection
|
On/Off Switch
|
Battery Life
(hours)
|
Lamp Life
(hours)
|
|
Professional Flicker Candle
|
17.5
|
1.5
|
26" wire leads
|
no
|
12
|
7000
|
|
Self Contained
|
9.75
|
0.875
|
9 volt adaptor
|
yes
|
16
|
7000
|
|
Wired Stem
|
9.75
|
0.875
|
26" wire leads
|
no
|
16
|
7000
|
|
Basic Module
|
4
|
0.875
|
short pins .5"
|
no
|
16
|
7000
|
|
Products
|
Tech Info
|
Where To Buy
|
Request A Quote
|
Contact Us
|
About Us
|
Search
© Rosco Laboratories 1998-2009
|
