|
VividFX paints are
compatible with all other Rosco Scenic paints. Use VividFX paints mixed
into standard scenic paint when matching the brightest Pantone colors.
VividFX uses the same high quality, water base, vinyl acrylic binder found
in Off Broadway paints. It is suitable for
use over most surfaces and for interior and exterior* applications.
Rosco's new VividFX
paints have been designed specifically to meet the demanding needs of the
special effects artist. The brilliant pigments used create stunning
blacklight effects and intermix cleanly to provide a wide array of
intermediate fluorescent hues.
Use VividFX
wherever eye-catching dramatic special effects painting is desired:
For
the Special Effects Artists...
The VividFX line of high quality fluorescent paints offers a special
effects artist something new and exciting: performance and dependability
in a fluorescent paint. With such a wide range of colors VividFX is up to
the challenge of almost any project. Whether its a fantastical matte
painting, a spectacular scenic effect that transforms under blacklight or
just a simple "dayglo" effect, VividFX paint will help create
extraordinary results with less work for the artist trying to find just
the right color.
For
the Scenic Artist...
More and more stage designers are creating sets that depend on the use of
blacklight. Until now, this meant more work and frustration for the scenic
artists who struggle to get an even coverage of paint and a bright enough
effect. But with the high pigment saturation, and the fine grind achieved
during their manufacturing, VividFX paints brush on smoothly and dry to an
even matte finish, in only one coat. And under ultra violet light, these
colors really shine.
For
the Night Club designer...
Night clubs, restaurants, bowling alleys, amusement parks, corporate
meetings all are making use of the exciting effects that can be created
using fluorescent paints. For these jobs, VividFX is the perfect choice.
The color palette is wide, and the performance exceptional. But more
importantly, these paints are available wherever the project is happening,
anywhere in the United States, anywhere in the world. With over 400
dealers nationwide and offices and distribution networks in over 30
countries around the world, you can be assured that when VividFX is
specified in the design, it will be available, everywhere.
 |
| The VividFX
Palette |
| #06250 Bright White |
#06257 Violet |
| #06251 Lemon Yellow |
#06258 Deep Blue |
| #06252 Orange
Sunset |
#06259 Brilliant
Blue |
| #06253 Orange |
#06260 Aquamarine |
| #06254 Scarlet Red |
#06261 Electric Green |
| #06255 Hot Pink |
#06262 Deep Green |
| #06256 Magenta |
|
|
FINISH:
Matte
SOLVENT:
Water
BINDER
TYPE: Vinyl Acrylic
DILUTION:
VividFX should be used straight out of the can. It can be diluted with water if necessary,
however, this may reduce the hiding power of the paint.
SURFACE
PREPARATION: Surfaces should be clean, dry and free from dirt and grease. Prime
porous surfaces, except fabrics, using Rosco Tough
Prime. If painting a new plaster surface, prime wall
with a commercial primer/sealer designed for raw plaster. Then use Rosco Tough Prime as a
final preparation. Use a white base coat to achieve the most dramatic color effects.
APPLICATION:
Stir contents before use. Do not shake. Apply by brush, roller or spray gun. Apply in
thin uniform coats, using a goad quality brush or roller. Use overlapping strokes,
keeping a wet edge.
FILM
THICKNESS: 2 mil. Dry Film.
COVERAGE:
Approximately 300 sq. ft. per gallon.
DRY TIME:
At 75°F (24°C), dries to the touch in 30 minutes. Can be recoated
in 1-2 hours.
CLEAN-UP:
Soap and water.
SHELF
LIFE: Minimum 24 months.
PACKAGING:
Gallon, Quart and Pint Cans.
*Fluorescent pigments will degrade
from prolonged exposure to ultraviolet light. Avoid direct sunlight whew possible.
CAUTIONS:
Do not apply when surface or air temperatures are below 50°F.
Keep from freezing. Avoid prolonged contact with skin or breathing of
spray. Do not take internally. Use adequate ventilation. KEEP OUT OF
REACH OF CHILDREN. |
